$1911

was donated

(( Bracelets )) Shaped Bracelet - Circle

Table of contents
1 - Pattern
2 -
Materials and Set Up
3 -
Step by Step
   3.0 -
Step 1
   3.1 -
Step 2
   3.2 -
Step 3
   3.3 -
Step 4
   3.4 -
Step 5
   3.5 -
Step 6
   3.6 -
Step 7
   3.7 -
Step 8
   3.8 -
Step 9
   3.9 -
Step 10
   3.10 -
Step 11
   3.11 -
Step 12
   3.12 -
Step 13
   3.13 -
Step 14
   3.14 -
Step 15
   3.15 -
Step 16
   3.16 -
Step 17
   3.17 -
Step 18(Optional)
3 -
Videos

Pattern


For those of you who learn easier with grids here is a diagram:

Note: This diagram assumes that the NEXT large diamond/circle will be blue.



Materials and Set Up


For this bracelet you are going to need six colors, some people use eight but in this tutorial. You need two of each color.
First, cut your strings, tie them together, and separate them into two groups. (One strand of each color per group).



Step by Step



Step 1


Starting on the left side, pick your first color and tie a forward knot around all the other threads in that group. (5 threads) *Make sure to always tie double knots!



Step 2


Pick up the color you want to use next and tie a forward knot over all the other threads in that group EXCEPT the one you just used. (4 threads)



Step 3


Continue doing this until you run out of colors... the last color is only knotted on and will not be used to make a knot



Step 4


Do exactly the same thing with the right group of threads except this time you will be doing backwards knots. it should look reverse of the other side.



Step 5


The sides are now done, time to work with the middle. take the two inner most threads (should be the same color) and join them with a forward knot.



Step 6


Going down the right side, make forward knots with all the threads and on the last one make a forward backward knot.



Step 7


Do the same thing on the left side except you will be doing backwards knots with all the threads and on the last one do a backwards forward knot.



Step 8


Take the next two colors in the middle and do a forward knot to join them.



Step 9


You will do the same thing as you just did with the first thread in steps six and seven except make the forward backward or backward forward on the thread right BEFORE the one you just used.



Step 10


Do the same with the next color in steps 8 and 9.



Step 11


Take the two inner most threads and knot them together with a forward knot. should be the same colors and the same threads used in step 10.



Step 12


Now go back to the threads used in steps 8 and 9. you will be going down the right side doing backward knots and the left side doing forward knots. ending with a forward knot to join them.



Step 13


Do the same in step 12 with the second outermost right and left thread.



Step 14


Now we move back to shaping the outside of the bracelet. on the right side pick up the second color from the right and make a forward knot over the right most color.



Step 15


Now pick up the third color from the right and make a forward knot over BOTH the first and second to the right colors.



Step 16


Continue doing that with all the colors in the right group. (kind of like in the beginning but opposite)



Step 17


Do the same thing on the left side except doing backwards knots.



Step 18(Optional)


If you want to keep all the circles the same color, then don't pay attention to this step. to make the colors different, just pick a different color to start with when you do it again.



Videos



By Masha Knots



By faithhopelove001



By BeyondBracelets


Editors

The original author of this tutorial is lakegenevagurl but it was also edited by Gracie04, HarryPotterGurl, Leechann, ScruffyPup, Foz, puddingtoe, kirsten78307, Zappity, SweetJeannie, Gladtobemom, ririttt, HarleyMama23, Acid, snubs, Alicat, Ukiedancer and Masha_Knots.

Uploaded photos (see all 288)

Click here to upload photos of your work!

Comments